SetCoat® Clear


SetCoat® Clear (formerly known as AquaSeal™) is a product designed to work specifically as an almost totally clear base coat for decorative finishing work, especially when using AquaCreme™ or AquaGlaze® and extended open time is important. When applied with caution, it also performs well as a barrier coat to seal in glazed finishes. Because clear SetCoat® Clear / AquaSeal™ seals porous latex paint, it is the recommended product to use over previously painted walls when the original color will be utilized in the decorative finish.

SKU: 000014 Category: Tag:
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Floors (Other), Cabinets (Raw), Cabinets (Pre-Finished), Countertops, Plastic Accents (Switch Plate ETC)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior & Exterior
Consistency (Density) Thick Liquid (Paint-Like)
Available Sizes & Square Footage 1 Gallon Pail- 301 – 400
32 Oz Jug- <100
Durability High Traffic- Highly Durable from wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Eggshell
Shelf Life 1 -2 Years
Approved Substrate Primed Drywall, Painted Drywall, Painted/Pre-Finished Wood, Melamine, Cement, Plastic
Suggested Additives No
  • During spray applications, thin SetCoat® Clear up to 20% with water if necessary.
  • For roller applications, use fine grain sponge rollers and finish roll in one direction to prevent lap marks.
  • Do not use over very dark colors. SetCoat Clear / AquaSeal™ will dry with a slight frosting effect.
  • Make sure that the work surface is clean and free of grease, dust and foreign matter.
  • Apply 2 thin coats of SetCoat® Clear using a brush, roller or spray equipment.
  • Do not apply thicker coats because this may cause the product to run or sag.
  • Let SetCoat® Clear dry overnight before applying any glaze.
  • To apply as a barrier coat, gently brush, roll or spray SetCoat® Clear on to the work surface. Do not overwork the SetCoat® Clear into the glaze or sensitive artwork.
  • Let dry overnight before applying any additional layers of glaze or clear coats.
  • V.O.C. compliant
  • Low odor
  • Non-Yellowing
  • Water resistant
  • Low co-solvents
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 55° F or in damp, cold or humid conditions, this will result in low adhesion and poor durability
Weight N/A


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…