Shop

Texture Coat™

$97.53

A light texture, with superior bonding and sealing qualities, make Texture Coat™ an ideal base coat for Olde World Marmorino®, Olde World Veneziano™, LusterStone® and Venetian Gem®. The recommended substrate for layered plaster finishes, Texture Coat™ is also very attractive as a slightly textured finish all on its own.

SKU: 000017 Category:
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Floors (Other), Cabinets (Raw), Cabinets (Pre-Finished), Countertops, Plastic Accents (Switch Plate ETC)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Thick Liquid (Paint-Like)
Available Sizes & Square Footage 1 Gallon Pail- 201 – 300
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Sand Grit
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Eggshell
Shelf Life 1 -2 Years
Approved Substrate Primed Drywall, Painted Drywall, Raw Wood, Painted/Pre-Finished Wood, Melamine, Cement, Plastic
Suggested Additives Faux Créme Color™
  • Product should not be used as a stain blocker or drywall sealer
  • Adheres to wood, concrete and laminates
  • Multiple thin coats work best
  • Texture Coat™ may he lightly tinted using FauxCrème Color™
  • Always make a sample to ensure the desired result
  • Ensure that the work surface is clean and free of dust/grease/film. Texture Coat™ works well over previously painted as well as unpainted surfaces.
  • Using a brush, roller or spray unit, apply a thin, even first coat. Allow the Texture Coat™ to dry for a minimum of 4 hours.
  • Repeat the above step, permitting the final coat to dry thoroughly, approximately 4 hours before applying any textured or heavy material to the work surface.
  • V.O.C. compliant
  • Low odor
  • Mix well before using
  • Chemically resistant
  • Environmentally friendly
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 55° F or in damp, cold or humid conditions, this will result in low adhesion and poor durability
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…