Approved Application Area | Floors, Countertops |
Application Method | Troweled |
Clean Up | Soap & Water |
Approved Climate Rating | Interior & Exterior |
Consistency (Density) | 10.22 lbs/gallon (weight per gallon) |
Available Sizes & Square Footage | 5 Gallon Pail- 100 – 250 1 Gallon Pail- 50 – 100 32 Oz Pail- <25 Square footage will depend on technique used and work surface conditions.) |
Durability | Medium Traffic- Withstands normal wear & tear |
Finish Texture | Dependent on Grade Purchased/Applied |
Intermix | No |
Manufacturer | Faux Effects International |
Product Line | Silver Line |
Sheen (Finish) | Matte |
Shelf Life | 1 -2 Years (Under Optimal Storing Conditions) |
Approved Substrate | Primed Drywall, Painted Drywall |
Suggested Additives | Colorants (Tinting Purposes) |
FauxCrete™
$103.53
FauxCrete™ (formerly RsCrete) is a superior formulation that incorporates advanced polymer technology, creating a concrete‐like veneer material suitable for interior and exterior applications. All FauxCrete™ grades are translucent in nature, but are tint-able and versatile.
- FauxCrete™ may be easily polished by fine sanding for a very smooth, refined surface.
- Easily repairable, it can be fine sanded and then patched or filled.
- There are several basic methods for applying the material depending on the application. Floors require the standard or coarse grade of FauxCrete™, while countertops many utilize a finish coat of the finer grades.
- There are many decorative methods of applying FauxCrete™ products including a fresco approach, a sponge‐on/trowel‐down method and the application of multiple colors at one time.
- To fill existing, deep grout lines or large cracks, tightly apply a coat of FauxCrete™ Coarse over the surface and let dry thoroughly. This may be tinted with up to 20% of SetCoat®. When dry, sand and smooth using an orbital sander.
- FauxCrete™ Fine may be thinned 20% with tap water for creative stencil effects.
- Always make a sample to ensure the desired result.
- FauxCrete™ can be tinted with SetCoat®, FauxCrème Color™ or FauxCrème Color Concentrate™. Add up to 5% of colorant; over-saturation of color can soften the product.
- When the surface is properly prepared, FauxCrete™ can be applied to furniture, floors, pool decks, decorative countertops and even glass.
- FauxCrete™ can be top coated with thin coats of a number of Faux Effects® products for other interior applications.;
Related
- Clean the substrate thoroughly. Pressure wash exterior surfaces. Allow all surfaces to dry completely.
- Apply 2 coats of any color SetCoat®; allow 4 hours drying time between coats and 24 hours after the final coat.
- It is suggested that the base coat of FauxCrete™ be more opaque. Add 10‐20% SetCoat® Neutral White or other color SetCoat® to FauxCrete™. Use this mixture to level the surface and fill in any nicks, shallow crevices, small holes, and grout lines. Use FauxCrete™ Coarse to fill in heavier grout lines or deeper surface imperfections. Using a stainless steel trowel, apply a thin even coat approximately 1/16” to 1/8” thick. If attempting to fill deeper holes, it is better to build the material in multiple fine layers. In layers, FauxCrete™ will maintain its physical properties and have better impact strength. Allow FauxCrete™ to dry thoroughly.
- The best visual effects are achieved by utilizing the translucent nature of the material lightly tinted with FauxCreme Color™. Apply lightly tinted FauxCrete™ onto the entire area. If grout lines are desired, it is suggested to keep grout tape lines thin. For a marble block pattern where the blocks abut each other, pencil in block lines atop the dry FauxCrete™, then color glaze the entire area. This is a very important speed function approach for large‐scale projects. Low tack tape does not bond well to FauxCrete™; use a higher tack tape to mask off grout lines or the appropriate patterns when desired.
- Colored stencil design work may be applied next using FauxCrete™, FauxCrete™ Fine or FauxCrete™ Super Fine over a base coat of FauxCrete™. A final light coat of un-tinted translucent FauxCrete™ Fine may be applied over stencil work.
- To seal FauxCrete™ and make it stain resistant, apply one coat of a 50/50 mixture of C‐500 and water. Rouge into the surface being careful not to let the mixture puddle on the finish. Let dry at least 12 hours; then, apply a coat of C‐500 full strength. Let dry 72 hours before use.
Related
- Sheen: Flat to very low sheen depending on grade
- V.O.C. compliant < 100 G/L
- Flame Spread Index (FSI): 25
- Smoke Developed Index (SDI): 15
- Soap and water clean up
- Density (weight per gallon): 10.22 lbs/gallon
- Do not apply or allow to cure in temperatures below 55º F
- Appropriate protective gear: gloves
- Store in a cool, dry location. Under optimum conditions product will remain stable for 12–24 months.
- Available in five different grades: Coarse, Standard, Fine, SuperFine and Metallic Tint Base – for both interior and exterior applications. FauxCrete™ Fine or Super Fine should only be used as a thin finish coat when desired.
Related
Weight |
N/A |
---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.