Shop

Clear Finishing Paste™

Finishing Paste™

$42.11

Finishing Paste™ is a wipe-on, water based acrylic finish that offers both durability, superior bonding and chemical resistance. As a clear, furniture quality topcoat and decorative finishing material, this proprietary product was developed especially for hard to finish surfaces such as carved wood, chairs, ornate moldings and railings.

SKU: 000033 Category:
Approved Application Area Cabinets (Raw), Cabinets (Pre-Finished)
Application Method Wiped-On
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Paste
Available Sizes & Square Footage 5 Gallon Pail- 1001 – 1500
1 Gallon Pail- 201 – 300
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Eggshell
Shelf Life 1 -2 Years
Approved Substrate Raw Wood, Painted/Pre-Finished Wood
Suggested Additives No
  • May be used as a colored finish toner as well as a clear topcoat
  • Do not apply in a circular motion over flat surfaces
  • Thin up to 20% with water
  • Product may be tinted with FauxCrème Color™ (AquaColor™)
  • Beautiful when used for translucent color stenciling
  • Material can be hand rubbed to a satin patina or wet sanded to a feathered edge.
  • Make sure that the work surface is clean and free of grease, dust, dirt, etc. Smooth the surface using 400 grit sandpaper if necessary.
  • Using a paint pad, Cheesecloth or lint free terry cloth, apply a thin smooth coat over the entire surface. Apply in straight lines. The material will dry quickly; however, for maximum durability allow each layer to dry at least 30 minutes between additional coats.
  • For maximum durability, more than one coat is recommended. Repeat the procedure from above for additional layers.
  • Hand rub, buff or rub smooth with fine steel wool after allowing the work surface to cure for 72 hours.
  • V.O.C. compliant
  • Non-Yellowing
  • Low Odor
  • Re-coat with ordinary paint
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 55° F or in damp, cold or humid conditions as it will reduce durability
  • Technical product- training through Faux Masters Studio workshop recomended
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

0