AquaGard™ UV


AquaGard™ UV is a furniture quality, acrylic material formulated for use as a clear topcoat to increase the durability of a decorative finish or artwork. AquaGard™ UV flows well and is an excellent barrier coat when applied with care. This is the recommended final coat for most finishes, but not table top applications.

SKU: 000027 Category:
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Floors (Other)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior/Exterior
Consistency (Density) Thin Liquid (Watery)
Available Sizes & Square Footage 5 Gallon Pail- 1501 – 2000
1 Gallon Jug- 301 – 400
32 Oz Jug- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Shelf Life 1 -2 Years
Approved Substrate Painted Drywall, Raw Wood, Painted/Pre-Finished Wood
Suggested Additives No
  • Thin with up to 20% with water for spray applications.
  • Use to seal low quality latex paint prior to glazing.
  • Use as a concrete sealer or as a clear topcoat over decoratively finished concrete.
  • On tabletops, floors or other high traffic areas always apply a final coat of AquaThane™ over AquaGard™ for added durability.
  • When using AquaGard™ Satin or Dull over dark colors, cloudiness or frosting may result.
  • Make sure that the work surface is dry and clean of dust or debris.
  • Apply 2 thin coats of AquaGard™ by brush, roller or spray unit.
  • Because AquaGard™ contains a co-solvents, it should be applied with caution over new or sensitive art and color work. Do not overwork this material. Softening of the previous layer can result, pulling at the color and the pattern.
  • A thin coat of ColorSeal™ should be applied prior to the application of AquaGard™ especially if the disruption of previous layers is a concern.
  • Allow the final coat of AquaGard™ to cure for 72 hours prior to polishing or rubbing smooth with fine steel wool or polishing compounds.
  • V.O.C. compliant
  • Resistant to UV (Ultra Violent) Rays
  • Non-Yellowing
  • Chemically Resistant
  • Hard & Durable
  • Anti-Sagging Qualities
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 60° F or in damp, cold or humid conditions
  • Technical product- training through Faux Masters Studio workshop recomended

AquaGard™ UV shares the same characteristics as regular AquaGard™, but this product withstands UV (Ultra Violent) rays.

Weight N/A


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…