AquaExtender™ (formerly known as Master Extender™) is a clear additive for glazing mediums, developed to increase the open time of AquaCreme™ and AquaGlaze®. AquaExtender™ is especially helpful in dry, hot environments or large projects where it is important to maintain a wet edge. The recommended amount to add to the glazing material ranges from 5 – 25%. The addition of AquaExtender™ to glaze mixtures increases open time, but at the same time greatly slows down the glaze curing time. As a result, the full level of durability will take longer to achieve.

SKU: 000002 Category: Tag:
Approved Application Area Walls, Ceilings, Floors (Wood), Floors (Cement), Floors (Other), Cabinets (Raw), Cabinets (Pre-Finished), Countertops
Application Method Brushed, Glazed, Rolled
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Thick Liquid (Paint-Like)
Available Sizes & Square Footage 1 Gallon Jug- N/A (Additive)
32 Oz Bottle- N/A (Additive)
16 Oz Bottle- N/A (Additive)
Durability Low Traffic- Fragile, apply in areas with minimal wear & tear
Finish Texture Smooth (Paint Like)
Intermix AquaCreme™, AquaGlaze®
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Matte (Flat)
Shelf Life > 2 Years
Approved Substrate N/A
Suggested Additives No
  • DO NOT exceed adding 50% AquaExtender™ to any glazing medium.
  • Always make a sample to ensure desired results.
  • Seal the work surface with 2 coats of SetCoat™ or SetCoat® Clear.
  • Mix up to 25% AquaExtender™ withAquaCreme™ or AquaGlaze® and the appropriate colorant (see workshop instructions for product).
  • Apply glaze mixture to work surface with a brush, roller, or spray unit.
  • Use the correct glazing technique toestablish the desired pattern. Let dry approximately 48 hoursbefore applying any topcoat.
  • Topcoat with ColorSeal™,AquaGard™, or AquaThane™ where necessary.
  • V.O.C. compliant
  • Low Odor
  • No added sheen
  • Interior & Exterior Rated
  • Environmentally friendly
  • Chemical Resistant
  • Store in a cool, dry location to prolong shelf life.
  • Do not apply in temperatures below 55° F or in damp, cold or humid conditions, this will result in low adhesion and poor durability
Weight N/A


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…