PrimEtch™

$17.15$44.76

PrimEtch™ is a water-based coating designed to be applied to hard to paint surfaces such as ceramic tile and glass. Versatile PrimEtch™ also performs exceptionally well as a transfer coat for applying Custom Art Imprints™.

Clear
SKU: 000066 Categories: ,
Approved Application Area Walls, Ceilings, Floors (Wood), Cabinets (Pre-Finished), Countertops, Plastic Accents (Switch Plate ETC)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Thick Liquid (Paint-Like)
Available Sizes & Square Footage 32 Oz Jug- <100 16 Oz Container- <100 8 Oz Container- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Smooth (Paint Like)
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Satin (Semi-Gloss)
Shelf Life 60 – 120 Days
Approved Substrate Painted Drywall, Painted/Pre-Finished Wood, Melamine, Plastic
Suggested Additives No
  • PrimEtch™ is an excellent primer coat for hard-to-coat interior/exterior surfaces including glass, tile, decorative sink bowls, vanity and kitchen countertops.
  • When PrimEtch™ is used to apply Custom Art Imprints™, the open tack time is 2 to 3 hours. Once the image has been embedded in the PrimEtch™, it is not necessary to seal the image. PrimEtch™ dries to a hard, glossy film.
  • PrimEtch™ may be thinned with water if necessary. Do not thin with more than 10% water.
  • PrimEtch™ dries to a clear finish and can be used without additional topcoating where hardness and durability are not an issue.
  • Clean the work surface with alcohol, then lightly sand with 220–400 grit black finishing paper.
  • Prepare the surface well and remove all dust and moisture prior to applying PrimEtch™.
  • Apply a thin even coat of PrimEtch™ to the work surface. This material may be rolled on or sprayed. Best results are achieved with a fine brush or lambs wool applicator.
  • Allow the material to dry for a minimum of 8 hours (depending on the drying conditions) or overnight.
  • Once dry, PrimEtch™ may be coated with a more durable finish such as SetCoat® or SetCoat® Clear.
  • The work surface is now ready to accept glazes, Venetian Gem™ Clear Gloss Coat, Custom Art Imprints™ or many other Faux Effects®
  • VOC compliant
  • Low Odor
  • Offers both physical and chemical bonding
  • Non-hazardous
  • Environmentally friendly
  • Do not apply in temperatures below 60°F, or in damp, cold or humid conditions.
  • Technical product- training through Faux Masters Studio workshop recommended
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.