Shop

Crackle Size Porcelain™

$18.33$53.93

Crackle Size Porcelain™ is a glue-like material that is the first step in the Porcelain Crackle system. This first step in the two-part system is designed to offer consistent finer grade cracking results.

Clear
SKU: 000053 Category:
Approved Application Area Walls, Ceilings, Cabinets (Pre-Finished)
Application Method Brushed, Rolled, Sprayed
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Gel
Available Sizes & Square Footage 1 Gallon Pail- 201 – 300
32 Oz Pail- <100
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture Crackle
Intermix No
Manufacturer Faux Effects International
Product Line Gold Line
Sheen (Finish) Matte (Flat)
Shelf Life 1 -2 Years
Approved Substrate Primed Drywall, Painted Drywall, Painted/Pre-Finished Wood
Suggested Additives No
  • Porcelain Crackle Size™ may be thinned with water up to 20% for spray applications.
  • Do not apply product in direct sunlight.
  • Setting time for Porcelain Crackle Size depends on the thickness of the layer, humidity and airflow.
  • To avoid sags and runs on vertical surfaces, apply two thinner coats of Porcelain Crackle Size™.
  • Always make a sample to ensure the desired results.
  • Seal the work surface by applying 2 coats of SetCoat® Clear. Allow the first coat to dry a minimum of 4 hours before applying the second coat; let the second coat dry a minimum of 24 hours.
  • Apply 2 even coat of Porcelain Crackle Size™ to the areas to be cracked.
  • Allow the size to dry approximately 15 to 45 minutes until tacky between coats, about the consistency of flypaper. Porcelain Crackle Size™ will first appear clear upon application, then turn cloudy, and return back to a clear state. At this point, the Porcelain Crackle material can be applied.
  • Apply a full coat of Porcelain Crackle; best by spray . Be careful to apply a full wet even coat of the crackle material into the Porcelain Crackle Size™; however, be sure to apply a full layer. Cracking will occur in about 30 minutes as the crackle material dries.
  • Let dry thoroughly. Drying time depends on climate conditions.
  • Apply a coat of ColorSeal™ to protect the crackle especially if a color glaze will be applied over the crackle.
  • For a final protective clear coat apply an additional coat of ColorSeal™ over any glaze work.
  • Additional clear coats of AquaGard™ or AquaThane™ may also be applied as needed when extra durability is needed.
  • V.O.C. Compliant
  • Do not apply in temperatures below 60° or over 90° F, or in damp, cold or humid conditions
  • Technical product- training through Faux Masters Studio workshop recommended

AquaSize™ produces random chips and patterns. Porcelain Crackle Size™ produces smaller, more grouped patterns. Both can be used with either of the Faux Effects® crackles.

Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.