Lime Slag™

$26.15$65.79

Lime Slag™ is a lime-based, putty additive created for use with Faux Effects® plasters and textured materials. This fine grind formulation of natural limestone has a wide variety of applications. When mixed into Venetian Gem® plaster, Lime Slag™ will increase the hardness and shine of the plaster. This material can also be utilized as a staining and burnishing agent when applied over dry Venetian Gem® plaster with excellent results.

Clear
SKU: 000091 Category:
Approved Application Area Walls, Ceilings
Application Method Troweled
Clean Up Soap & Water
Approved Climate Rating Interior
Consistency (Density) Paste
Available Sizes & Square Footage 1 Gallon Pail- N/A (Additive)
32 Oz Pail- N/A (Additive)
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture N/A
Intermix Venetian Gem®, SandStone™, PlasterTex™ or any other Faux Effects® plaster to achieve crackle finish.
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) N/A
Shelf Life 30 – 60 Days
Approved Substrate Primed Drywall, Painted Drywall
Suggested Additives FauxCrème Colors™
  • Lime Slag™ can be tinted with FauxCrème Color™. Because the high pH level in lime-based products can adversely affect certain colorants, do not use FauxColor™ with Lime Slag™.
  • Lime Slag™ can be dry sanded using fine sandpaper, 800 – 1200 is best for burnishing.
  • The normal ratio to use when adding Lime Slag™ to any product is 25% Lime Slag™ to 75% plaster or textured product.
  • When using Lime Slag™ as a burnishing or staining agent, thin with water, apply and then burnish when dry.
  • Ensure that the work surface is clean, dry and well sealed. For best results seal the surface with 2 coats of SetCoat® Clear or SetCoat®.
  • Mix approximately 32 oz. of Lime Slag™ into 1 gallon of Venetian Gem® plaster (about 25%).
  • Apply 1 to 2 thin, smooth layers. Allow each layer to dry thoroughly.
  • Once the work surface is dry, burnish the surface with a good quality stainless steel trowel held at a 30º angle. For the final burnish hold the trowel flat against the surface and move in a circular motion to finish compressing and shining the finish.
  • V.O.C. Compliant
  • Coverage dependent on amount added to plaster or texture material
  • Wear protective clothes, gloves and goggles during application. The high pH level may irritate skin and eyes.
  • Do not apply in temperatures under 55°F, or in damp, cold or humid conditions.
  • Technical product- training through Faux Masters Studio workshop recommended
Weight N/A

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.