Seal Imprint Coat areas with ColorSeal, SetCoat Clear, SquaGard, or AquaThane. Imprint Coat will reamin tacky unless sealed.
Always make a sample to ensure desired results.
Apply one or two thin coats of Imprint Coat using a foam brush over the area where the Custom Art Imprint or leafing material will be placed. Porous surfaces will take two coats– wait at least 30 minutes between coats.
Allow the material to dry to a firm tack, at least 15 minutes.
Apply Custom Art Imprints according to directions or leafing material over the Imprint Coat.
Coverage: 50-100 sq.ft. per quart
Soap and water clean up
May irritate skin – wear rubber gloves when applying
Do not apply in temperatures below 55 degrees F
Only logged in customers who have purchased this product may leave a review.