Designer FoilFX™


Designer FoilFX™ is easy to use, durable metallic foil that can be used alone or to embellish a variety of finishes when applied over Designer FoilSize™. Available in a variety of colors, Designer FoilFX™ will not tarnish and does not require a sealer. It can be layered to create dimensional metallic effects with more shine than metallic paints.

SKU: 001065 Category:

Available Color Samples (Please make a selection above)

Color Options

*While every effort is made to accurately display color samples, the above image renderings and color swatches are for reference only. Please do not base any color purchases on images or swatches as actual color may vary slightly due to various monitor and graphics card settings.

Approved Application Area Walls, Ceilings, Cabinets (Pre-Finished)
Application Method Gilded (Leafing Technique)
Clean Up N/A
Approved Climate Rating Interior
Consistency (Density) Foil
Available Sizes & Square Footage 24″ X 100′- Covers 200 Sq. Ft.
Durability Medium Traffic- Withstands normal wear & tear
Finish Texture N/A
Intermix No
Manufacturer Faux Effects International
Product Line Silver Line
Sheen (Finish) Metallic (Shimmer)
Shelf Life > 2 Years
Approved Substrate Painted Drywall
Suggested Additives No
  • Sealing Designer FoilFX™ areas with ColorSeal™, SetCoat® Clear, Varnish Plus™, AquaGard™ or AquaThane™ will dull the bright Designer FoilFX™ qualities. It is best to leave Designer FoilFX™ unsealed.
  • It is recommended to utilize Designer FoilSize™ as adhesive base for best application results as other adhesives have varying consistencies and chemical make-ups compromising foil adhesion.
  • Designer FoilFX™ in holographic patterns can be applied in different directions for a dimensional effect.
  • After drying, additional coats of Designer FoilSize™ and Designer FoilFX™ can be applied.
  • Tone Designer FoilFX™ with FauxColor™ and activate with Activator II™ for a reactive finish.
  • Always make a sample to ensure desired results.
  • Apply one or two thin coats of Designer FoilSize™ using a Foam Brush over the area where the Designer FoilFX™ will be placed. For stencil patterns, pounce Designer FoilSize™ through the open stencil areas. Porous surfaces require two coats of size for best results–wait at least 30 minutes between coats
  • Allow Designer FoilSize™ to dry to a tack, at least 30 minutes.
  • Apply Designer FoilFX™ over Designer FoilSize™ shiny side up and rub using a clean cloth to transfer foil
  • VOC compliant
  • Low Odor
  • Offers both physical and chemical bonding
  • Non-hazardous
  • Environmentally friendly
  • Do not apply in temperatures below 60°F, or in damp, cold or humid conditions.
  • Technical product- training through Faux Masters Studio workshop recommended
Weight N/A


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.